Many DIY players are cautious and cautious in hardware selection when they are down, so that different hardware combinations can play a greater role. For high-performance processors, you need to use efficient radiators to protect the long time. The temperature is running.

There are many points in the choice of the heat sink. For example, the heat sink should match the size of the chassis. The high tower heat sink will cause the side panel cover to be closed in some small chassis; some wide body heat sinks will squeeze the memory module slot to affect the user. Installing multiple memory modules is also a convenient way for users to use different hardware.

In addition to the above-mentioned precautions that everyone knows, there are some places that are easily overlooked when installing and using the heat sink, and also the details that the player needs to pay attention to. Below I will introduce you to the selection and installation of the heat sink. nitty gritty.

Most newly purchased radiators are attached with plastic stickers on the side that touches the CPU. This layer of stickers usually says the words that were removed before use, but some users may be careless or the words on the stickers are not understood by the user. This caused the heat sink to be attached to the surface of the CPU together with the sticker.

When the heat sink is in use, the bottom surface is in contact with the CPU, and the heat sink fins are used for heat dissipation. In order to have better heat conduction effect, the silicone grease is applied to the gap. If the article blocks the heat transfer, the heat sink may be seriously affected. effect.

The function of the bottom sticker of the radiator is to keep the bottom surface clean and tidy, to avoid scratches or bumps that may be caused during transportation, resulting in uneven surface, which can also reduce dust or debris during use, and can provide better heat dissipation. effect.

Therefore, the CPU heat sink must be cleaned when it is used. The plastic sticker that comes with the factory must be removed. The clean surface is the basis for good heat dissipation.